Add the following lines to wpa_nf files in the BOOT directory. Download the pre-configured image and write it to your TF card.Ģ. The pre-configured images have already installed the required libraries and drivers, and the program runs automatically after booting.
#CONTROLLING MAGIC MIRROR RASPBERRY PI INSTALL#
It is recommended to install pre-configured images for newbies or first-time installations. The second method is to configure the environment running the program on the original image of the Raspberry Pi.
Method one, using a pre-configured mirror.
If you want to remove this error, remove otg_mode=1 in of config.txt, and add dtoverlay=dwc2, dr_mode=host (USB cannot be recognized without adding it). If you use the latest Raspberry Pi OS (image after October 30, 2021) USB2.0 is OTG mode by default, and CM4 will report an error:Ĭonfig failed, hub doesn't have any ports! (err -19) If you need to start, you need to add the following demo to the config.txt file: The USB port is disabled by default on the CM4 to save power. Write Image for Compute Module Boards Lite version.Write Image for Compute Module Boards eMMC version.75x75mm spacing mounting holes (M4 screw hole) for a general wall mount.Embedded Microphone and speaker, adopts Snowboy Hotword Detection Engine.Toughened glass capacitive touch panel, 6H hardness, supports up to 10-points touch.One-way mirror, can display news, weather, and time.13.3inch IPS screen,1920 x 1080 high resolution.13.3inch Magic Mirror, Voice Assistant, Touch Control, Raspberry Pi 3A+ InsideĬategory: OLEDs / LCDs, LCD, Raspberry Pi LCD
0 kommentar(er)
